Fluke Calibration 9142 Field Metrology Well

Recently, we introduced Metrology Wells, which provide the very best performance in portable temperature calibration. The new 914X Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.
Download Datasheet
fluke ii900

Key Features:

  1. Lightweight, portable, and fast
  2. Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
  3. True reference thermometry with accuracy to ±0.01 °C
  4. On-board automation and documentation
  5. Metrology performance in accuracy, stability, uniformity, and loading

Fluke Calibration 9143 Field Metrology Well

Field Metrology Wells are packed with functionality and are remarkably easy to use. They are lightweight, small, and quick to reach temperature set points, yet they are stable, uniform, and accurate. These industrial temperature loop calibrators are perfect for performing transmitter loop calibrations, comparison calibrations, or simple checks of thermocouple sensors. With the “process” option, there is no need to carry additional tools into the field.
Download Datasheet
fluke ii900

Key Features

  1. Lightweight, portable, and fast
  2. Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
  3. True reference thermometry with accuracy to ±0.01 °C
  4. On-board automation and documentation
  5. Metrology performance in accuracy, stability, uniformity, and loading

Fluke Calibration 9144 Metrology Well

The Fluke 9144 Metrology Well is built to handle a wide range of field applications with speed, precision, and convenience. Traditionally, only the electronics of a temperature transmitter were calibrated—leaving the sensor unchecked. However, studies show that 75% of transmitter system error originates in the sensor. The 9144 enables full-loop calibration for more accurate and reliable results.
Download Datasheet
fluke ii900

Key Features

  1. Lightweight, portable, and fast
  2. Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
  3. True reference thermometry with accuracy to ±0.01 °C
  4. On-board automation and documentation
  5. Metrology performance in accuracy, stability, uniformity, and loading

Fluke Calibration 6102
Micro-Bath

Need portability and extreme stability? Fluke Calibration Micro-Baths have both. We invented the Micro-Bath. And, while many have tried to duplicate it, none of them use proprietary Fluke Calibration controllers, so none of them deliver performance like a Fluke Calibration bath.
Download Datasheet
fluke ii900

Key Features:

  1. World’s smallest portable calibration baths
  2. Calibrates sensors of any size or shape
  3. Stability to ±0.015 °C
  4. Ranges from –30 °C to 200 °C

Fluke Calibration 7103
Micro-Bath

Wherever you go with your Micro-Bath, you can count on its performance. Each model is stable to ±0.03 °C or better, depending on the fluid you use. Uniformity is ±0.02 °C or better for low uncertainties using a reference thermometer. Display accuracy has been improved to ±0.25 °C for quick calibrations without a reference thermometer. In short, you get the stability and precision of a liquid bath in a dry-well-sized package.
Download Datasheet
fluke ii900

Key Features:

  1. World’s smallest portable calibration baths
  2. Calibrates sensors of any size or shape
  3. Stability to ±0.015 °C
  4. Ranges from –30 °C to 200 °C

Fluke 2700G Series Reference Pressure Gauges

The 2700G has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one custom engineering unit.
Download Datasheet
fluke ii900

Key Features:

  1. Ranges from 100 kPa (15 psi, 1 bar) to 70 MPa (10,000 psi, 700 bar)
  2. Accuracy: Up to 0.02% of full scale
  3. Combine with 700PTPK/700HTPK pump kits for portable pressure testing, or with P5510, P5513, P5514B, or P5515 Pumps for bench top calibration
  4. Test Port: 1/4 NPT Male, with 1/4 BSP and M20 X 1.5 adaptors included

Terms and Conditions

  1. 1. Promotion is valid between 18 June 2025 to 31 July 2025 (both dates inclusive) for all local purchases made with participating local authorized Fluke distributors in Indonesia, Malaysia, Philippines, Singapore, and Thailand only.
  2. 2. Promotion is valid for users residing in Indonesia, Malaysia, Philippines, Singapore, and Thailand only.
  3. 3. Promotion price excludes VAT/GST.
  4. 4. All orders placed with participating distributors on selected promotional model during the offer period are eligible to receive the 20% discount.
  5. 5. Fluke South East Asia reserves the right to change these terms and conditions at any time without prior notice.

Request for a free demo and try the product for yourself

Enter your email address below and a local authorized Fluke representative will get in touch with you.

Get free demo
Request Quote