Free Full Day Hands-on Seminar
*Limited seats available, register now to secure yours.
Kuala Lumpur Seminar
Thursday, 13 October 2022 8.30am – 5.00pm Eastin Hotel, Kuala Lumpur |
Penang Seminar
Wednesday, 19 October 2022 8.30am – 5.00pm Eastin Hotel, Penang |
Johor Bahru Seminar
Wednesday, 26 October 2022 8.30am – 5.00pm DoubleTree by Hilton Hotel, Johor Bahru |
Drive Efficiency and Reliability to Achieve Energy Savings Goal
Are your assets keeping up with the upkeep?
A growing number of companies are driving “sustainability’ efforts due to the climate change. Manufacturers have introduced technologies to help businesses to decarbonize and optimize their energy usage. From the installation of clean energy sources to the introduction of modern power conversion systems, these are several solutions that require proper maintenance.
Join us in this seminar where we will be sharing strategies that will contribute towards your carbon emission objectives such as driving the energy transition to cleaner energy, increase energy efficiency, and ensure reliability of assets.
There is enormous demand for reliable electrical infrastructures to support renewable energy generation. Understanding the state of energy and power demand can support your mission to introduce green energy alternatives and introduce ways to improve energy efficiencies in the facilities.
The industries and businesses can contribute towards reducing their carbon emissions through investing in modern technology that drives efficient production and electrification. Discover effective methods to understand potential areas of hidden issues to consider in motor-drive and EVSE systems.
In energy management, apart from achieving improved efficiency, the implementation of approach to reduce current energy demand is equally important. Discover innovative ways to tackle the challenge in energy reduction through failure analysis and waste identification.
- Learn to upkeep and enhance Solar PV installations
- Learn to optimize the energy efficiency of your daily production assets
- Learn to adopt new innovative approaches in reducing energy demand
- Learn to achieve improve productivity with smart diagnostic solution
- Learn to overcome challenges and maintenance of EVSE stations
-
Registration08:30am – 09:00am
-
Welcome and Introduction09.00am – 09:15am
-
Session 1 - Improve building energy efficiencies09:15am – 10:15am
-
Tea Break10:15am – 10:30am
-
Session 2: Reliability of power conversion systems10:30am – 11:30am
-
Solution Break Out 111:30am – 12:00pm
-
Lunch Break12:00pm – 01:30pm
-
Solution Break Out 201:30pm – 02:00pm
-
Session 3 - Waste and Failure detection02:00pm – 03:00pm
-
Tea Break03:00pm – 03:15pm
-
Solution Break Out 203:15pm – 04:00pm
-
Q&A, Lucky Draw04:00pm – 05:00pm
-
End of event05:00pm
- Production/ Operation/ Plant Managers
- Plant maintenance and Service Managers/ Engineers
- Electrical and Mechanical Engineers
- Facilities Maintenance Professionals
- Manufacturing Professionals
- Field Service Professionals
- Professionals in Installation and Troubleshooting
- Solar Maintenance Team
- Electrical vehicle (EV) Charger installation and Maintenance Team
Fluke South East Asia Pte Ltd
Liaw Wei Ping has more than ten years of experiences in manufacturing and oil and gas industries as service engineer, regional tech supervisor, and regional training and coordinator for the Asia Pacific region. As the Channel Manger for Fluke Electronics Malaysia, he is equipped with wealth of experiences in conducting products and technological training.
Fluke South East Asia Pte Ltd
With over 6 years of field experience in automation control system, he has provided consultive technical support in troubleshooting plant electrical and mechanical and data reporting. Pok Wen also specializes in product implementation and problem solving.
Uptime & Upskill - Strategies for Process Calibration Excellence
Keep your assets up accurately, reliably, and efficiently!
A process manufacturing plant will thrive on uptime of assets and quality of
end-products.
Without uptime, there will be no efficiency and without quality, there will be no
customers. It is critical to establish an effective maintenance schedule, a good
system in process calibration, and maintain instrumentation control to uphold the
uptime and ensure quality and efficiency.
In this seminar, learn:
- Best practices in troubleshooting, commissioning and calibration in instrumentation
- Concepts of calibration and measurements
- Technological proven and future-ready calibration management and automation skills
At the end of the seminar, you will be able to apply these practical strategies into your process maintenance and calibration program to achieve high uptime, quality and efficiency.
How to quickly identify potential faulty component(s) quickly? What are the tools and techniques to save time and effort in troubleshooting, commissioning, and calibration? How to verify and adjust field transmitters?
(Kuala Lumpur seminar only)
Experience in-depth sharing session from Fluke calibration experts
- The role of calibration in modern world
- Calibration technology and traceability
- Practical Solutions for demanding calibration
for world-class quality
(Penang and Johor Bahru seminars only)
Routine checking is a good practice on how one able to mitigate the potential operational risks associated with calibrated measuring instruments. With the guide of Test Uncertainty Ratio (TUR), the setup of an in-house ergonomic test station for overall quality assurance will no longer be a distant dream.
For many users, managing calibration data is critical for compliance and auditing. Software and calibration automation are efficient methods to consider in any modern process plants. Experience extended solution from Fluke for all your calibration needs.
- Learn 3 best practices in process troubleshooting and calibration
- Learn to select the right tools to uphold safety and quality compliance
- Learn about essential know-hows and concepts to improve calibration and measurement confidence
- Learn to use calibration management software and smart calibrators for automation and efficiency
-
Registration08:30am – 09:00am
-
Welcome & Introduction09.00am – 09:15am
-
Session 1: Uptime - best practices in instrumentation & process calibration09:15am – 10:15am
-
Tea Break10:15am – 10:30am
-
Session 2: Upskill – importance of calibration and practical solutions
(Kuala Lumpur seminar only)
Session 2: Upskill – Routine checking Know-hows, Risk management and TUR for world-class quality (Penang & Johor Bahru seminars only)10:30am – 11:30am -
Solution Break Out 1 (demo station)11:30am – 12:00pm
-
Lunch Break12:00pm – 01:30pm
-
Solution Break Out 2 (demo station)01:30pm – 02:00pm
-
Session 3: Upskill – calibration automation, software & management02:00pm – 03:00pm
-
Tea Break03:00pm – 03:15pm
-
Solution Break Out 3 (demo station)03:15pm – 04:00pm
-
Q&A, Lucky Draw04:00pm – 05:00pm
-
End of event05:00pm
- Plant maintenance and Service Managers / Engineers
- Electrical and Instrumentation Engineers
- Instrumentation & Automation Managers / Engineers
- QA/ QC Managers / Engineers
- Field Service Professionals
- Calibration Managers / Engineers / Technicians
- Validation Engineers / Quality Engineers
Fluke Corporation, Phoenix, Arizona, USA
(Kuala Lumpur seminar only)
Equipped with over 35 years of experience, Karl Kurtz is currently responsible for sales, service and training for Asia Pacific region and has been working with leading engineers, researchers, and metrologists in the field of pressure and flow calibration since 1990s. Karl believes strongly in helping customers achieve excellence in their calibration and measurement work.
Fluke South East Asia Pte Ltd
(Kuala Lumpur seminar only)
Nam Nguyen is well-versed in industrial process maintenance and calibration. He has consulted maintenance, instrumentation and control teams across the regions since 2012. His recent interest in calibration technology led him to further exploration in process and pressure calibration. A customer’s success motivates him to find innovative solutions for new challenges.
Fluke South East Asia Pte Ltd
(Penang & Johor Bahru seminar only)
Mr. Ng Chang Keong (CK) is the calibration specialist for temperature calibration products and with over 17 years of market and field experience in the calibration industry. He is dedicated to product and solutions applications training and is passionate about creating calibration awareness campaigns for all industrial sectors.
Fluke South East Asia Pte Ltd
Liaw Wei Ping has more than ten years of experiences in manufacturing and oil and gas industries as service engineer, regional tech supervisor, and regional training and coordinator for the Asia Pacific region. As the Channel Manger for Fluke Electronics Malaysia, he is equipped with wealth of experiences in conducting products and technological training.
Eastin Hotel, Kuala Lumpur
Address: Pusat Dagang, 13, Jalan 16/11, Seksyen 16, 46350 Petaling Jaya, Selangor, Malaysia.
Eastin Hotel, Penang
Address: Queensbay, 1, Solok Bayan Indah, 11900 Bayan Lepas, Pulau Pinang, Malaysia.
DoubleTree by Hilton Hotel Johor Bahru
Address: 12, Jalan Ngee Heng, Bandar Johor Bahru, 80000 Johor Bahru, Johor, Malaysia.
- Registration is subject to confirmation based on Fluke’s discretion.
- Every registrant will be notified on his/her status of registration (successful or unsuccessful) via his/her registered email or phone. We will contact you one week before the event.
- The seminar is FREE and open to relevant job titles only.
- Registration will close two weeks prior to seminar.
- If you have any questions regarding this event, please contact us at fsea.events@fluke.com
Download document
- Participants must be fully vaccinated to attend. Proof of vaccination must be shown on the actual day.
- Safety precautionary measures will be put in place; masks must always be worn.
Eastin Hotel, Kuala Lumpur
Address: Pusat Dagang, 13, Jalan 16/11, Seksyen 16, 46350 Petaling Jaya, Selangor, Malaysia.
Eastin Hotel, Penang
Address: Queensbay, 1, Solok Bayan Indah, 11900 Bayan Lepas, Pulau Pinang, Malaysia.
DoubleTree by Hilton Hotel Johor Bahru
Address: 12, Jalan Ngee Heng, Bandar Johor Bahru, 80000 Johor Bahru, Johor, Malaysia.
- Registration is subject to confirmation based on Fluke’s discretion.
- Every registrant will be notified on his/her status of registration (successful or unsuccessful) via his/her registered email or phone. We will contact you one week before the event.
- The seminar is FREE and open to relevant job titles only.
- Registration will close two weeks prior to seminar.
- If you have any questions regarding this event, please contact us at fsea.events@fluke.com
Download document
- Participants must be fully vaccinated to attend. Proof of vaccination must be shown on the actual day.
- Safety precautionary measures will be put in place; masks must always be worn.